You have a new computer and are ready to set it up. While this may seem like an overwhelming and difficult task, it is really very simple. It does not matter what name brand of computer you have, as most computers are set up in a very similar way.
If you are setting up a newly purchased computer that is still in the box, you will probably find a how-to guide in the packaging that includes step-by-step details. However, even if it didn't include instructions, you can still set up the computer in just a few easy steps. In this lesson, we'll go through the different steps that are needed to set up a typical computer.
Setting Up a Desktop Computer
Step 1
Unpack the monitor and computer case from the box. Remove any plastic covering or protective tape. Place the monitor and the computer case where you wish on the desk or work area.
Think about where you want your desk or work area to be located, and where you want your monitor, computer case, and other hardware. Be sure to place your computer case in an area that is well ventilated and that has good air flow. This will help to prevent overheating.
Step 2
Locate the monitor cable. It will usually be either a VGA or a DVI cable. VGA cables will often have blue connectors to make them easier to identify. (If you have an all-in-one computer that's built into the monitor, you can skip to Step 4).
Step 3
Connect one end of the cable to the monitor port on the back of the computer case, and the other end to the monitor. Hand-tighten the plastic-covered screws on the monitor cable to secure it.
Many computer cables will only fit a specific way. If the cable doesn't fit, don't force it, or you might damage the connectors. Make sure the plug aligns with the port, and then connect it.
Step 4
Unpack the keyboard and determine whether it uses a USB (rectangular) connector or a PS/2 (round) connector. If it uses a USB connector, plug it into any of the USB ports on the back of the computer. If it uses a PS/2 connector, plug it into the purple keyboard port on the back of the computer.
Step 5
Unpack the mouse and determine whether it uses a USB (rectangular) connector or a PS/2 (round) connector. If it uses a USB connector, plug it into any of the USB ports on the back of the computer. If it uses a PS/2 connector, plug it into the green mouse port on the back of the computer.
- If your keyboard has a USB port, you can connect your mouse to the keyboard instead of connecting it directly to your computer.
- If you have a wireless mouse or keyboard, you may need to connect a Bluetooth dongle (USB adapter) to your computer. However, many computers have built-in Bluetooth, so a dongle may not be necessary.
0 comments:
Post a Comment